Siemens SINAMICS S120 Function Manual page 300

Basic functions
7.10 Automatic restart
Exceptions
There are faults, where after they have occurred, an automatic restart would be dangerous
or is undesirable. Enter the numbers of these faults into p1206[0...9]. The automatic restart is
suppressed if one of these faults occurs. After the cause of the fault has been removed, the
drives must be switched-on in another way.
Overview of important parameters (see SINAMICS S120/S150 List Manual)
• r0863.0...2
• p1206[0...9]
• p1207
• p1208
• p1210
• p1211
• p1212
• p1213
• r1214.0...15
300
CO/BO: Drive coupling status word / control word
Faults without automatic restart
BI: Automatic restart (AR) - connection to the following drive object
BI: Automatic restart modification, infeed
Automatic restart mode
Automatic restart, startup attempts
Automatic restart, delay time startup attempts
Automatic restart monitoring time
CO/BO: Automatic restart status
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Drive functions