Siemens SINAMICS S120 Function Manual page 622

Safety Integrated basic functions
10.10 Acceptance test and certificate
D) Functional testing of actual value acquisition
1. General testing of actual value acquisition
– After exchanging the component, initial activation and brief operation in both
2. Test of fail-safe actual value acquisition
– Only necessary if Extended Functions are used.
– If the motion monitoring functions are activated (e.g. SLS or SSM with hysteresis),
E) Conclusion of the report
Report of the commissioning status tested and countersignatures
1. Extension of checksums (for each drive)
2. Countersignature
622
directions.
WARNING
Risk through process
During this process, all personnel must keep out of the danger area.
briefly operate the drive in both directions.
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Drive functions