Siemens SINAMICS S120 Function Manual page 397

However, the following access rights apply for a commissioned drive:
Functions of the Web server
Start page / password input
Diagnostic pages (version overview, DO state, alarms,
diagnostic buffer)
Resetting the fault memory
Uploading trace files
Creating/expanding/removing parameter lists
Reading parameters
Writing and saving parameters
Updating the configuration
Updating the firmware
Loading user-defined pages to the drive
1)
2)
Access rights can be set individually for each user and page in the parameter lists via the Web server
Password assignment
For the "SINAMICS" and the "Administrator" users, the password protection is regulated as
follows:
● SINAMICS: No password protection
● Administrator: A password is required (there is no default password)
After the first commissioning, the passwords for the two users can only be defined or
changed via the STARTER configuration. With the restoration of factory settings, the
passwords are reset to the initial setting.
The password is queried once when the corresponding Web page is called.
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Only those lists may be edited for which the user has the appropriate access right. A default
setting applies during creation depending on the user.
These rights can be individually assigned for a parameter list or a user-defined page. There is a
default setting depending on the user.
configuration.
Basic functions
7.28 Web server
Access rights
All SINAMICS
X X
– X
– X
– X
– X
1)
– X
2)
– X
2)
– –
– –
– –
Administrator
X
X
X
X
X
1)
X
2)
X
2)
X
X
X
397