Siemens SINAMICS S120 Function Manual page 783

Table 12- 1
Parameter
p0130
p0180
p0186[0...3]
p0820, p0821
p0822 to p0824
p0826[0...3]
p0827[0...3]
r0830.0 to r0830.3
p0831[0...3]
p0833.0..2
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Figure 12-5 Example of motor changeover
Settings for the example
Settings
4
4
0, 1, 2, 3
Digital inputs DDS
selection
0
0, 1, 2, 3
0, 1, 2, 3
Digital outputs,
contactors
Digital inputs, auxiliary
contacts
0, 0, 0
Remark
Configure four MDS.
Configure four DDS.
The MDS are assigned to the DDS.
The digital inputs for motor changeover via DDS
selection are selected. Binary coding is used (p0820 =
bit 0, etc.).
Different numbers indicate a different thermal model.
Assigning the bit from r0830 to the MDS. If p0827[0] =
1, for example, bit p0830.1 is set when MDS0 is
selected via DDS0.
The digital outputs for the contactors are assigned to
the bits.
The digital inputs for the feedback signal of the motor
contactors are assigned.
The drive controls the contactor circuit and pulse
inhibition. Parking bit (Gn_ZSW14) is set.
Applications
12.5 Description
783