Users And Access Rights - Siemens SINAMICS S120 Function Manual

Web server
13.2 Fundamentals
13.2.4

Users and access rights

Access to the converter is possible via 2 defined users in the web server.
● Administrator
● SINAMICS
Note
Configuring passwords for the users
You can configure the passwords of the users "Administrator" and "SINAMICS" in the system
settings of the web server with administrator rights (see Chapter "Setting or changing user
accounts (Page 756)").
The table below gives you an overview of the access rights assigned in the default settings of
the web server.
Functions of the web server
Home page
● Password input
Diagnostics
● Display communication settings
● Adapt message list
● Acknowledge alarms
Settings
● Adapt parameter list
● Change parameterization
Backup and restore
● Back up parameter settings externally
● Load externally backed-up parameter settings
● Restoring factory settings
Adapt system settings
● Set user accounts
● Configure IP connection
Performing a firmware update
720
Access rights The "Administrator" user has full access to the converter data displayed in the
web server.
Password For access to the converter, assigning an administrator password is absolutely
necessary (see Chapter "Assigning the administrator password (Page 722)").
Access rights The "SINAMICS" user has restricted access rights in the default settings of the
web server.
Password By default, a password is not assigned for the SINAMICS user. We recommend
that a password is assigned to avoid access by unauthorized persons.
Access rights
Administrator
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Write
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
SINAMICS
Write
Write
Write
Write
Write
Read
None
1)
None
1)
None
1)
None
1)
None
1)
None
1)
Drive functions