Siemens SINAMICS S120 Function Manual page 890

Basic information about the drive system
13.14 Licensing
Displaying the license key
If the license key on the memory card is accidentally deleted, you can display it again via the
WEB License Manager.
1. Call the "WEB License Manager".
2. Click the entry "Display license key" under "User" in the navigation.
3. Set the "License number" entry on the right in the drop-down list.
4. Enter your license number in the field below and then click the "Display license key"
button.
The current license key is then displayed.
You can request this license key by e-mail in the form of a report. This report contains all
previously ordered licenses for this memory card. Missing licenses can be detected and
re-ordered on the basis of this report.
5. Enter your address in the "E-mail address" field and then click the "Request license
report" button.
Entering the license key in STARTER
With the STARTER commissioning tool, enter the letters and numbers of the license key
directly, as specified in the "WEB License Manager". Always enter upper-case letters in
parameter p9920.
In this case, STARTER handles the ASCII coding in the background.
Example of a license key: "E1MQ-4BEA"
Note
If several licenses have been ordered for a card, the license key is longer than in the
example.
If in addition to the existing license, additional licenses are ordered for a card, the license key
must be generated again by the WEB License Manager and re-entered.
Procedure for entering a license key (see example):
p9920[0] = E 1st character
...
p9920[8] = A 9th character
Note
When changing p9920[x] to the value 0, all of the following indices are also set to 0.
In STARTER, this is performed by deleting the value of p9920[x].
After the license key has been entered, it has to be activated as follows:
● p9921 = 1 (start, activate license key)
The parameter is automatically reset to 0
890
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Drive functions