Access Rights For Parameter Lists - Siemens SINAMICS S120 Function Manual

6.28.4.3

Access rights for parameter lists

Default rights for parameter lists
Three standard rights are specified for the user-defined parameter lists:
Standard right
C:
R:
W:
The access rights for the user-defined parameter lists are predefined as follows:
Situation:
"SINAMICS" user creates list
"Administrator" user creates list
You can change the rights of individual parameter lists based on the default settings shown
in the table.
Note
• "SINAMICS" and "Administrator" users can reduce their own rights.
• "Administrator" users can reduce the rights of "SINAMICS" users or expand them up to
Changing access rights to parameter lists in the Web server
1. Start the Web server (see Starting the Web server (Page 386)).
2. Click the "Parameter" entry in the navigation.
3. Click the tab of the user whose access rights you want to change.
4. Select the required individual parameter list.
Drive functions
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
Explanation
Change The user can create, change and delete the list.
Read The user can read the parameters from the list.
Write The user can write (and save) the parameters from the list.
their own level.
The parameter display is then active on the right in the browser. There are separate tabs
for "SINAMICS" users and "Administrator" users.
The individual parameter list of the user is displayed in the "List name" drop-down list.
"SINAMICS" rights
Change / Read
Read
Basic functions
6.28 Web server
"Administrator" rights
Change / Read / Write
Change / Read / Write
385