R&S FSV-K7 Operating Manual page 99

®
R&S FSV-K7/K7S
Example:
Usage:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT <SortMode>
This command selects the order in which the results of a peak search are returned.
Suffix:
<n>
<m>
Parameters:
<SortMode>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X
This command queries the position of the peaks on the x-axis.
The order depends on the sort order that has been set with
MARKer<m>:FUNCtion:FPEaks:SORT
The number of peaks on the number that has been set with
MARKer<m>:FUNCtion:FPEaks:COUNt?.
Suffix:
<n>
<m>
Return values:
<PeakPosition>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
CALC:MARK:FUNC:FPE 3
Searches the 3 highest maxima for trace 1
CALC:MARK:FUNC:FPE:COUN?
Queries the number of maxima found
Query only
See "Marker Peak List"
.
Selects the measurement window.
Selects the marker.
X
Sorts the peaks according to increasing position on the x-axis.
Y
Sorts the peaks according to decreasing position on the y-axis.
CALC:MARK:FUNC:FPE:SORT Y
Sets the sort mode to decreasing y values
See "Sort Mode Freq/Lvl"
on page 99.
.
Selects the measurement window.
Selects the marker.
Position of the peaks on the x-axis. The unit depends on the
measurement.
on page 74
on page 74
CALCulate<n>:
CALCulate<n>:
99