R&S FSV-K7 Operating Manual page 122

®
R&S FSV-K7/K7S
Example:
Mode:
Manual operation:
[SENSe:]ADEMod<n>:AF:COUPling <Coupling>
This command selects the coupling of the AF path of the analyzer in the specified win-
dow.
Suffix:
<n>
Parameters:
<Coupling>
Example:
Mode:
Manual operation:
[SENSe:]ADEMod<n>:AF:SPAN <Span>
This command sets the span for AF spectrum result display.
The span is limited to half the measurement bandwidth of analog demodulation
([SENSe:]ADEMod:BANDwidth|BWIDth:DEModulation
Suffix:
<n>
Parameters:
<Span>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
ADEM ON, see
CALCulate<n>:FEED
Switches on the analog demodulator
CALC:FEED 'XTIM:FM:AFSP', see
on page 90
Switches on AF spectrum result display of FM
ADEM:BAND 5 MHz, see
BANDwidth|BWIDth:DEModulation
Sets the measurement bandwidth
ADEM:AF:CENT 500kHz, see
on page 121
CENTer
Sets the AF center frequency
ADEM:AF:SPAN 200kHz, see
on page 122
SPAN
Sets the AF span
ADEMOD
See "AF Center (AF Spectrum)"
.
1...4
window
AC | DC
*RST: AC (PM); DC (FM)
ADEM:AF:COUP DC
Switches on DC coupling.
ADEMOD
See "AF Coupling AC/DC"
.
1...4
irrelevant
*RST: 2.5 MHz
on page 90
CALCulate<n>:FEED
[SENSe:]ADEMod:
on page 129
[SENSe:]ADEMod<n>:AF:
[SENSe:]ADEMod<n>:AF:
on page 42
on page 35
on page 129).
122