R&S FSV-K7 Operating Manual page 203

®
R&S FSV-K7/K7S
If AC is selected, the frequency offset and phase offset are automatically corrected,
i.e. the trace is always symmetric with respect to the zero line.
Remote command:
[SENSe:]ADEMod<n>:AF:COUPling
Deviation Lin/Log ← AF Range ← Left
Switches between logarithmic and linear display of the modulation depth or the phase
deviation (Analog Demodulation only) or the frequency deviation.
Remote command:
DISPlay[:WINDow<n>]:TRACe<t>:Y:SPACing
Unit ← AF Range ← Left
Opens a submenu to define the modulation unit.
Phase Unit (Rad/Deg) ← Unit ← AF Range ← Left
Sets the phase unit to rad or deg for displaying PM signals.
Remote command:
UNIT:THD
THD Unit (% / DB) ← Unit ← AF Range ← Left
Sets the unit to percent or DB for THD measurements.
Remote command:
UNIT:THD
Abs. Dev Unit (kHz/dBm) ← Unit ← AF Range ← Left
Sets the unit for absolute deviation to kHz or dBm. This softkey is only available with
the FM Stereo option K7S.
Remote command:
UNIT:ADEV
Rel. Dev Unit (dB / %) ← Unit ← AF Range ← Left
Sets the unit for relative deviation to dB or percent. This softkey is only available with
the FM Stereo option K7S.
Remote command:
UNIT:RDEV
Time Domain Zoom ← Left
Opens a submenu to activate and configure the zoom function.
State On / Off ← Time Domain Zoom ← Left
Activates or deactivates the time domain zoom according to the defined settings.
"ON"
Operating Manual 1176.7561.02 ─ 06
on page 170
on page 170
on page 249
on page 250
Activates the time domain zoom. The zoom area is defined using the
"Start""Start" on page 36 and "Length
on page 36 / "Length
FM Stereo Option R&S FSV–K7S
Instrument Functions FM Stereo (R&S FSV–K7S)
on page 122
on page 114
Manual""Length Manual"
Auto""Length Auto" on page 36 softkeys.
203