R&S FSV-K7 Operating Manual page 131

®
R&S FSV-K7/K7S
Mode:
[SENSe:]ADEMod:FM:AFSPectrum[:TYPE] <Type>
This command selects the AF spectrum result types of the FM demodulated signal to
be measured simultaneously.
Parameters:
<Type>
Example:
Mode:
[SENSe:]ADEMod:FM:AFSPectrum:RESult <Type>
This command reads out the AF spectrum result data of the FM demodulated signal for
the specified result type. The data format of the output data is determined with the
FORMat command.
Return values:
<Type>
Return values
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
ADEMOD
*RST: OFF,OFF,OFF
<result type 1|2|3|4|5|6>: WRITe, AVERage, MAXHold, MINHold,
VIEW, OFF; for details see
Types", on page 118.
The result type "AF spectrum of the FM demodulated signal"
cannot be activated at the same time as "AF spectrum of AM or
PM demodulated signal".
ADEM:FM:AFSP AVER,MAXH,MINH
Determines average, maximum and minimum value simultane-
ously
ADEM:FM:AFSP WRIT,OFF,OFF
Determines only current measurement results
ADEM:FM:AFSP OFF,OFF,OFF
Switches calculation of AF spectrum off
ADEMOD
<result type>: WRITe, AVERage, MAXHold, MINHold; for details
see Chapter 2.3.6.1, "Trace Mode Result
The specified result type must be one of those configured with
the
[SENSe:]ADEMod:FM:AFSPectrum[:TYPE]
Otherwise a query error will be generated.
ASCII Format (FORMat ASCII) or Binary Format (FORMat
REAL,32); for details see
Returned Values: ASCII Format and Binary
on page 118.
Default unit: dB (logarithmic display) or Hz (linear display)
Chapter 2.3.6.1, "Trace Mode Result
Types",
Chapter 2.3.6.2, "Formats for
Format",
on page 118.
command.
131