R&S FSV-K7 Operating Manual page 218

®
R&S FSV-K7/K7S
Mono ← Trigger Source
Triggers on the specified frequency level of the mono FM signal.
Remote command:
TRIGger<n>[:SEQuence]:LEVel:SFM:MONO
Stereo ← Trigger Source
Triggers on the specified frequency level of the stereo FM signal.
Remote command:
TRIGger<n>[:SEQuence]:LEVel:SFM:STEReo
RDS ← Trigger Source
Triggers on the specified frequency level of the RDS FM signal.
Remote command:
TRIGger<n>[:SEQuence]:LEVel:SFM:RDS
Pilot ← Trigger Source
Triggers on the specified frequency level of the pilot FM signal.
Remote command:
TRIGger<n>[:SEQuence]:LEVel:SFM:PILot
RF ← Trigger Source
Triggers on the specified level of the RF signal.
Note: The RF offline trigger is based on the I/Q data of the demodulated signal, in a
very limited bandwidth. For a wider trigger bandwidth and triggering based on the cur-
rently measured RF input signal, use the more powerful
Remote command:
TRIGger<n>[:SEQuence]:LEVel:AM[:ABSolute]
Time ← Trigger Source
Opens an edit dialog box to define a repetition interval in which the measurement is
triggered. The shortest interval is 2 ms.
Remote command:
TRIG:SOUR
Trigger Level
Defines the trigger level as a numeric value.
In the trigger mode "Time", this softkey is not available.
Remote command:
TRIGger<n>[:SEQuence]:LEVel:IFPower
For digital input via the R&S Digital I/Q Interface, R&S FSV-B17:
TRIGger<n>[:SEQuence]:LEVel:BBPower
Trigger Polarity
Sets the polarity of the trigger source.
Operating Manual 1176.7561.02 ─ 06
TIMETRIGger<n>[:SEQuence]:SOURce
FM Stereo Option R&S FSV–K7S
Instrument Functions FM Stereo (R&S FSV–K7S)
on page 246
on page 247
on page 247
on page 247
RF Power
on page 164
on page 167
on page 165
on page 165
trigger.
218