R&S FSV-K7 Operating Manual page 194

®
R&S FSV-K7/K7S
Screen A-D ← Display Config ← Left
For each of the four available screens you can configure what is to be displayed. To
define the Display Configuration for a screen, select the corresponding tab. For each
screen you can define:
●
"Off": Whether it is displayed or not
●
"Summary": Whether a summary of the evaluation lists from all screens is dis-
played instead of a diagram
●
"RF Diagrams": Which type of diagram is displayed; this is the standard Analog
Demodulation diagram type
For details on the result diagram types, see
Display",
●
"FM Stereo Diagrams": Which type of FM stereo diagram is displayed; each mea-
surement type can be displayed either in the time domain or as a spectrum
Note: Summaries that take up the entire width of the screen are displayed as tables; if
only half the screen width is available (2 windows next to each other), the summary is
displayed as a list. Thus, the factory-set predefined screen configurations contain only
3 screens: 2 for diagrams and one full-width screen for the summary.
Remote command:
INSTrument[:SELect]
Activates stereo fm demodulation.
CALCulate<n>:FEED
Defines the display configuration.
Predefined ← Display Config ← Left
You can store and load predefined screen configurations. All available configurations
are displayed in the "Predefined" tab. The current screen configuration is indicated
under "Current" at the top of the list.
Operating Manual 1176.7561.02 ─ 06
on page 20.
on page 116
on page 90
FM Stereo Option R&S FSV–K7S
Instrument Functions FM Stereo (R&S FSV–K7S)
Chapter 2.1.10, "Measurement Result
194