R&S FSV-K7 Operating Manual page 44

®
R&S FSV-K7/K7S
RF Atten Auto/Mech Att
El Atten
El Atten Mode
Ref Level
Ref Level
Grid Abs/Rel
Input
Input 50 Ω/75 Ω
Ref Level
Opens an edit dialog box to enter the reference level in the current unit (dBm, dBµV,
etc).
The reference level is the maximum value the AD converter can handle without distor-
tion of the measured value. Signal levels above this value will not be measured cor-
rectly, which is indicated by the "IFOVL" status display.
Remote command:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel
AF Range
Only available for AM/FM/PM measurements (see
Result
For details refer to the "AF Range" softkey of the main menu (see
on page 34).
Range
Only available for RF measurements (see
play",
Opens a submenu to define the level display range.
Range Log 100 dB ← Range
Sets the level display range to 100 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see
SPACing
Display range:
DISP:WIND:TRAC:Y 100DB, see
on page 111
Range Log 50 dB ← Range
Sets the level display range to 50 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see
SPACing
Display range:
DISP:WIND:TRAC:Y 50DB, see
on page 111
Operating Manual 1176.7561.02 ─ 06
Auto........................................................................................ 47
On/Off.............................................................................................................. 47
(Auto/Man).............................................................................................47
Offset.............................................................................................................48
Position......................................................................................................... 48
.................................................................................................................48
(AC/DC)................................................................................................................48
............................................................................................................49
Display", on page 20).
on page 20).
on page 114
on page 114
Analog Demodulation Option R&S FSV–K7
Softkeys of the Analog Demodulation option
Chapter 2.1.10, "Measurement
Chapter 2.1.10, "Measurement Result Dis-
DISPlay[:WINDow<n>]:TRACe<t>:Y:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
DISPlay[:WINDow<n>]:TRACe<t>:Y:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 113
"AF Range"
44