Trace Mode Overview - R&S FSV-K7 Operating Manual

®
R&S FSV-K7/K7S
3. To configure several traces to predefined display modes in one step, press the but-
ton for the required function:
For details see

2.1.7 Trace Mode Overview

The traces can be activated individually for a measurement or frozen after completion
of a measurement. Traces that are not activate are hidden. Each time the trace mode
is changed, the selected trace memory is cleared.
The R&S FSVA/FSV offers 6 different trace modes:
Clear Write
Overwrite mode: the trace is overwritten by each sweep. This is the default setting.
All available detectors can be selected.
Remote command:
DISP:TRAC:MODE WRIT, see
on page 110
Operating Manual 1176.7561.02 ─ 06
Display Mode
Detector Auto Select
Trace Detector
Preset All Traces
Select Max | Avg | Min
Select Max | ClrWrite | Min
Chapter 2.1.7, "Trace Mode
Analog Demodulation Option R&S FSV–K7
Instrument Functions Analog Demodulation
●
Clear Write
●
Max Hold
●
Min Hold
●
Average
●
View
●
Blank
For details see Chapter 2.1.7, "Trace Mode
Activates automatic detector selection (see
activated, the "Trace Detector" setting is ignored.
Defines a specific trace detector. If one of the following settings is
defined, the "Detector Auto Select" option is deactivated.
●
"Auto Select" on page 59
●
"Auto Peak" on page 60
●
"Positive Peak" on page 60
●
"Negative Peak" on page 60
●
"Sample" on page 60
●
"RMS" on page 60
●
"Average" on page 61
●
"Quasipeak" on page 61
Trace 1: Clear Write
Trace 2-6: Blank
Trace 1: Max Hold
Trace 2: Average
Trace 3: Min Hold
Trace 4-6: Blank
Trace 1: Max Hold
Trace 2: Clear Write
Trace 3: Min Hold
Trace 4-6: Blank
Overview",
DISPlay[:WINDow<n>]:TRACe<t>:MODE
Overview", on page 17.
Auto Select softkey). If
on page 17.
17