[Sense:]Ademod:capture:time - R&S FSV-K7 Operating Manual

®
R&S FSV-K7/K7S
[SENSe:]ADEMod:CAPTure[:MODE] <Mode>
This command defines how the size of the the capture buffer is defined for analog
demodulation.
Parameters:
<Mode>
Example:
Mode:
Manual operation:
[SENSe:]ADEMod[:STATe] <State>
This command activates the analog demodulator of the instrument. The instrument will
be set to zero span at the current center frequency.
Parameters:
<State>
Example:
Mode:
[SENSe:]ADEMod<n>:AF:CENTer <Frequency>
This command sets the center frequency for AF spectrum result display.
Suffix:
<n>
Parameters:
<Frequency>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
AUTO
The capture buffer size is identical to the defined measurement
time (see [SENSe:]ADEMod:MTIMe).
MANual
The size of the capture buffer is defined manually using the

[SENSe:]ADEMod:CAPTure:TIME

*RST: AUTO
ADEM:CAPT MAN
Activates the manual capture buffer processing mode.
ADEMOD
See "Capture Mode" on page 57
ON | OFF
*RST: OFF
ADEM ON
Switches the analog demodulator on.
ADEMOD
.
1...4
irrelevant
*RST: 1.25 MHz
command.
121