R&S FSV-K7 Operating Manual page 88

®
R&S FSV-K7/K7S
Example:
Usage:
Mode:
CALCulate<n>:MARKer:FUNCtion:ADEMod:FM[:RESult<t>]? <Result>
CALCulate<n>:MARKer:FUNCtion:ADEMod:FM[:RESult<t>]?? <MeasType>
This command queries the results of FM modulation measurement.
Suffix:
<n>
<t>
Parameters:
<Result>
Query parameters:
<MeasType>
Example:
Usage:
Mode:
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
ADEM ON (see
[SENSe:]ADEMod[:STATe]
Switches on analog demodulator
CALC:FEED 'XTIM:FM:TDOM', see
on page 90
Switches on FM result display
CALC:MARK:FUNC:ADEM:FERR?
Queries the frequency error of trace 1
Query only
ADEMOD
.
1...4
irrelevant
1...6
trace 1, 2, 3, 4, 5 or 6
The result of the selected measurement type is returned.
PPEak | MPEak | MIDDle | RMS
PPEak
Measurement with detector Pluspeak (+PK)
MPEak
Measurement with detector MinusPeak (-PK)
MIDDle
Averaging ±PK/2
RMS
RMS measurement
ADEM ON (see
[SENSe:]ADEMod[:STATe]
Switches on the analog demodulator.
CALC:FEED 'XTIM:FM:TDOM', see
on page 90
Switches on the FM result display.
CALC:MARK:FUNC:ADEM:FM? PPE
Queries the peak value.
Query only
ADEMOD
on page 121)
CALCulate<n>:FEED
on page 121)
CALCulate<n>:FEED
88