R&S FSV-K7 Operating Manual page 239

®
R&S FSV-K7/K7S
[SENSe:]SFM:<ChannelType>:FILTer:COUPling <State>
This command couples the filter settings for the specified channel type to other chan-
nels. The filter settings for all channels for which this setting is set to "ON" are defined
identically.
Suffix:
<ChannelType>
Parameters:
<State>
Example:
Mode:
[SENSe:]SFM:<ChannelType>:FILTer:DEMPhasis:STATe <State>
This command activates/deactivates the selected deemphasis for the specified chan-
nel type.
Suffix:
<ChannelType>
Parameters:
<State>
Example:
Mode:
Manual operation:
[SENSe:]SFM:<ChannelType>:FILTer:DEMPhasis:TCONstant <Value>
This command selects the deemphasis for the specified channel type. For details on
deemphasis refer to
Suffix:
<ChannelType>
Parameters:
<Value>
Example:
Mode:
Manual operation:
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the FM Stereo Option (R&S FSV–K7S)
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
ON | OFF
*RST: OFF
SFM:LEFT:FILT:COUP ON
SFM
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
ON | OFF
*RST: OFF
SFM:LEFT:FILT:DEMP:STAT ON
SFM
See "Deemphasis" on page 33
"Deemphasis" on page 33.
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
25 us | 50 us | 75 us | 750 us
*RST: 50 us
SFM:LEFT:FILT:DEMP:TCON 75us
SFM
See "Deemphasis" on page 33
FM Stereo Option R&S FSV–K7S
239