R&S FSV-K7 Operating Manual page 240

®
R&S FSV-K7/K7S
[SENSe:]SFM:<ChannelType>:FILTer:HPASs:STATe <State>
This command activates/deactivates the selected high pass filter for the specified
channel type.
For details on the high pass filter refer to
Suffix:
<ChannelType>
Parameters:
<State>
Example:
Mode:
[SENSe:]SFM:<ChannelType>:FILTer:HPASs:FREQuency <FilterType>
This command selects the high pass filter type for the specified channel type. For
details on filters refer to
Suffix:
<ChannelType>
Parameters:
<FilterType>
Example:
Mode:
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:STATe <State>
This command activates the low pass filter for the specified channel type.
For details on the low pass filter refer to
Suffix:
<ChannelType>
Parameters:
<State>
Example:
Mode:
Manual operation:
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the FM Stereo Option (R&S FSV–K7S)
"High Pass"
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
ON | OFF
*RST: OFF
SFM:LEFT:FILT:HPAS:STAT ON
SFM
"Deemphasis" on page 33.
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
Range: 50 to 300
*RST: 300Hz
Default unit: Hz
SFM:LEFT:FILT:HPAS:FREQ 300Hz
SFM
"Low Pass"
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
ON | OFF
*RST: OFF
SFM:LEFT:FILT:LPAS:STAT ON
SFM
See "Low Pass" on page 31
FM Stereo Option R&S FSV–K7S
on page 31.
on page 31.
240