R&S FSV-K7 Operating Manual page 82

®
R&S FSV-K7/K7S
2.3.6.6 SENSe:FILTer Subsystem (Analog Demodulation, Analog Demodulation)................ 148
2.3.6.7 SENSe:FREQuency Subsystem (Analog Demodulation, R&S FSV–K7)................... 153
2.3.6.8 SENSe:SWEep Subsystem (Analog Demodulation, R&S FSV–K7)...........................155
2.3.6.9 Other commands in the SENSe subsystem................................................................157
2.3.7 TRACe Subsystem (Analog Demodulation, R&S FSV–K7)........................................ 160
2.3.7.1 Commands of the TRACe subsystem.........................................................................160
2.3.7.2 Formats for Returned Values: ASCII Format and Binary Format................................ 161
2.3.8 TRIGger Subsystem (Analog Demodulation, R&S FSV–K7)...................................... 162
2.3.9 UNIT Subsystem (Analog Demodulation, R&S FSV–K7)........................................... 169
2.3.10 Other Commands Referenced in this Manual............................................................. 170
2.3.10.1 CALCulate:DELTamarker Subsystem (Analog Demodulation, R&S FSV–K7)............170
2.3.10.2 INPut subsystem......................................................................................................... 176
2.3.10.3 MMEMory subsystem..................................................................................................183
2.3.10.4 OUTPut subsystem..................................................................................................... 183
2.3.10.5 Other Commands........................................................................................................184
2.3.1 Notation
In the following sections, all commands implemented in the instrument are first listed
and then described in detail, arranged according to the command subsystems. The
notation is adapted to the SCPI standard. The SCPI conformity information is included
in the individual description of the commands.
Individual Description
The individual description contains the complete notation of the command. An example
for each command, the *RST value and the SCPI information are included as well.
The options and operating modes for which a command can be used are indicated by
the following abbreviations:
Abbreviation
A
A-F
A-T
ADEMOD
BT
CDMA
EVDO
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
Description
spectrum analysis
spectrum analysis – span > 0 only (frequency mode)
spectrum analysis – zero span only (time mode)
analog demodulation (option R&S FSV-K7)
Bluetooth (option R&S FSV-K8)
CDMA 2000 base station measurements (option R&S FSV-K82)
1xEV-DO base station analysis (option R&S FSV-K84)
82