R&S FSV-K7 Operating Manual page 174

®
R&S FSV-K7/K7S
Manual operation:
CALCulate<n>:DELTamarker<m>:MREF <RefMarkerNo>
This command defines the reference marker for a delta marker other than marker 1.
The reference may be another marker or the fixed reference.
Suffix:
<n>
<m>
Parameters:
<RefMarkerNo>
Example:
Manual operation:
CALCulate<n>:DELTamarker<m>[:STATe] <State>
This command turns delta markers on and off.
If the corresponding marker was a normal marker, it is turned into a delta marker.
No suffix at DELTamarker turns on delta marker 1.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:DELTamarker<m>:TRACe <TraceNumber>
This command selects the trace a delta marker is positioned on.
The corresponding trace must have a trace mode other than "Blank".
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
See "Link Mkr1 and Delta1"
.
Selects the measurement window.
Selects the marker.
1 ... 16
Selects markers 1 to 16 as the reference.
FIXed
Selects the fixed reference as the reference.
CALC:DELT3:MREF 2
Specifies that the values of delta marker 3 are relative to marker
2.
See "Marker Wizard"
.
Selects the measurement window.
Selects the marker.
ON | OFF
*RST: OFF
CALC:DELT1 ON
Switches marker 1 to delta marker mode.
See "Marker 1 / Marker 2 / Marker 3 / ... Marker 16,/ Marker
Norm/Delta" on page 68
See "Marker Wizard"
on page 71
on page 68
on page 68
174