®
R&S
FSV-K7/K7S
Add ← Predefined ← Display Config ← AM
Opens an edit dialog box to enter a name for the current screen configuration. The
configuration is then stored and added to the list.
Apply ← Predefined ← Display Config ← AM
Applies the currently selected configuration from the list to the current display.
Remove ← Predefined ← Display Config ← AM
Removes the currently selected configuration from the list.
Restore ← Predefined ← Display Config ← AM
Restores the default display configurations. Existing configurations with the default
names are replaced.
Select Trace ← AM
Opens an edit dialog box to enter the number of the trace for which the data is to be
displayed in the currently selected screen. Only activated traces can be selected.
Demod BW ← AM
Opens an edit dialog box to enter the demodulation bandwidth of the analog demodu-
lation. The demodulation bandwidth determines the sampling rate for recording the sig-
nal to be analyzed. For details on the relation between demodulation bandwidth and
sampling rate refer to
Offset",
Remote command:
[SENSe:]BANDwidth|BWIDth:DEMod
Operating Manual 1176.7561.02 ─ 06
Chapter 2.1.3, "Sample Rate, Measurement Time and Trigger
on page 13.
Analog Demodulation Option R&S FSV–K7
Softkeys of the Analog Demodulation option
on page 147
30