R&S FSV-K7 Operating Manual page 171

®
R&S FSV-K7/K7S
When measuring the phase noise, the command defines a new reference point level
for delta marker 2.
Suffix:
<n>
<m>
Example:
Usage:
Manual operation:
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:X <Reference>
This command defines the horizontal position of the fixed delta marker reference point.
The coordinates of the reference may be anywhere in the diagram.
When measuring the phase noise, the command defines the frequency reference for
delta marker 2.
Suffix:
<n>
<m>
Parameters:
<Reference>
Example:
Manual operation:
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:Y <RefPointLevel>
This command defines the vertical position of the fixed delta marker reference point.
The coordinates of the reference may be anywhere in the diagram.
When measuring the phase noise, the command defines the level reference for delta
marker 2.
Suffix:
<n>
<m>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
.
Selects the measurement window.
Selects the marker.
CALC:DELT:FUNC:FIX:RPO:MAX
Sets the reference point level for delta markers to the peak of
the selected trace.
Event
See "Peak Search" on page 73
.
Selects the measurement window.
Selects the marker.
Numeric value that defines the horizontal position of the refer-
ence.
For frequency domain measurements, it is a frequency in Hz.
For time domain measurements, it is a point in time in s.
*RST: Fixed reference: OFF
CALC:DELT:FUNC:FIX:RPO:X 128 MHz
Sets the frequency reference to 128 MHz.
See "Ref Point Frequency (span > 0)/Ref Point Time (zero
span)" on page 73
.
Selects the measurement window.
Selects the marker.
171