R&S FSV-K7 Operating Manual page 169

®
R&S FSV-K7/K7S
Manual operation:
Table 2-5: Assignment of general purpose bits to LVDS connector pins
Bit
GP0
GP1
GP2
GP3
GP4
GP5
2.3.9 UNIT Subsystem (Analog Demodulation, R&S FSV–K7)
UNIT:ANGLe <Unit>
This command selects the unit for angles (e.g. for PM display).
The unit is defined globally for all windows.
Suffix:
<n>
Parameters:
<Unit>
Example:
Mode:
UNIT:POWer <Unit>
This command selects the unit for power.
The unit is defined globally for all windows.
Suffix:
<n>
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the Analog Demodulation (R&S FSV–K7)
See "Trigger Source"
See "Free Run"
See "External"
See "RF Power"
See "IF Power"
See "FM" on page 65
See "AM" on page 65
See "PM" on page 65
See "RF" on page 65
See "Time" on page 66
See "Trigger Source"
LVDS pin
SDATA4_P - Trigger1
SDATA4_P - Trigger2
SDATA0_P - Reserve1
SDATA4_P - Reserve2
SDATA0_P - Marker1
SDATA4_P - Marker2
.
irrelevant
DEG | RAD
*RST: RAD
UNIT:ANGL DEG
ADEMOD, SFM
.
irrelevant
Analog Demodulation Option R&S FSV–K7
on page 64
on page 64
on page 64
on page 64
on page 65
on page 216
169