R&S FSV-K7 Operating Manual page 71

®
R&S FSV-K7/K7S
Marker Zoom (span > 0)
Opens an edit dialog box to enter a display range for the zoom. The area around
marker 1 is expanded accordingly and more details of the result can be seen. If no
marker is activated, marker 1 is switched on and set on the largest signal.
The following sweep is stopped at the position of the reference marker. The frequency
of the signal is counted and the measured frequency becomes the new center fre-
quency. The zoomed display range is then configured and the new settings are used
by the R&S FSVA/FSV for further measurements.
If the display has not yet been switched to the new frequency display range and you
press the softkey, the procedure is aborted. If an instrument setting is changed during
this operation, the procedure is also aborted.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:ZOOM
Link Mkr1 and Delta1
The delta marker 1 is linked to marker 1, so if the x-axis value of the marker 1 is
changed, the delta marker 1 will follow on the same x-position. The link is off by
default.
You can set the two markers on different traces to measure the difference (e.g.
between a max hold trace and a min hold trace or between a measurement and a ref-
erence trace).
Remote command:
CALCulate<n>:DELTamarker<m>:LINK
Link Time Marker
Links the markers in all time domain diagrams.
Remote command:
CALCulate<n>:MARKer<m>:LINK
Link AF Spectrum Marker
Links the markers in all AF spectrum displays.
Remote command:
CALCulate<n>:MARKer<m>:LINK
2.2.11 Softkeys of the Marker Function Menu – MKR FUNC Key (Analog
Demodulation)
The following table shows all softkeys available in the "Marker Function" menu.
Select Marker
Phase
Ref Fixed.......................................................................................................................72
n dB
Operating Manual 1176.7561.02 ─ 06
(No)........................................................................................................ 72
Noise..................................................................................................................72
└ Ref. Fixed On/Off............................................................................................ 72
└ Ref Point Level................................................................................................72
└ Ref Point Frequency (span > 0)/Ref Point Time (zero
└ Peak Search................................................................................................... 73
down..................................................................................................................... 73
Analog Demodulation Option R&S FSV–K7
Softkeys of the Analog Demodulation option
on page 95
on page 173
on page 96
on page 96
span).......................... 73
71