®
R&S
FSV-K7/K7S
Label
SINAD
THD
In addition, the following general information for the input signal is provided:
●
Carrier Power
●
Carrier Frequency
●
Reference Deviation
●
Cross Talk (difference between left and right signal in dB), see also
CALCulate<n>:MARKer:FUNCtion:SFM:<ChannelType>[:RESult<m>]?
on page 234
3.1.2 Softkeys of the FM Stereo Menu - MEAS key (K7S)
This section describes all softkeys available in the "FM Stereo" menu.
Left.............................................................................................................................. 193
Operating Manual 1176.7561.02 ─ 06
└
Display
Config...............................................................................................193
└
Screen
A-D......................................................................................... 194
└ Predefined.......................................................................................... 194
└ Add........................................................................................... 195
└ Apply.........................................................................................195
└ Remove.................................................................................... 195
└ Restore..................................................................................... 195
└ Close........................................................................................ 195
└
Result Summary
Setup................................................................................. 196
└ Detector.............................................................................................. 197
└ Mode...................................................................................................197
└ Coupled.............................................................................................. 197
└
Meas To
Ref........................................................................................197
└
Meas
Time.................................................................................................... 197
└
AF
Filter........................................................................................................ 198
FM Stereo Option R&S FSV–K7S
Instrument Functions FM Stereo (R&S FSV–K7S)
Description
Signal-to-noise and distortion
Measures the ratio of the total power to the power of noise and har-
monic distortions. The noise and harmonic power is calculated
inside the AF spectrum span. The DC offset is removed before the
calculation.
SINAD
dB
20
log
noise
Total harmonic distortion
The ratio of the harmonics to the fundamental and harmonics. All
harmonics inside the AF spectrum span are considered up to the
tenth harmonic.
i
2
THD
dB
20
log
i
1
total
power
distortion
power
2
U
i
2
U
i
192