[Sense:]Ademod:pm[:Tdomain][:Type] - R&S FSV-K7 Operating Manual

®
R&S FSV-K7/K7S
[SENSe:]ADEMod:PM[:TDOMain][:TYPE] <Type>
This command selects the result types of the PM-demodulated signal to be created
simultaneously.
Parameters:
<Type>
Example:
Mode:
[SENSe:]ADEMod:PM[:TDOMain]:RESult <Type>
This command reads the result data of the PM demodulation for the specified result
type. The data format of the output data is determined with the FORMat command.
Return values:
<Type>
Return values
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
*RST: OFF,OFF,OFF
<result type 1|2|3|4|5|6>: WRITe, AVERage, MAXHold, MINHold,
VIEW; for details see
Types", on page 118.
ADEM:PM AVER,MAXH,MINH, see
on page 134
TDOMain][:TYPE]
Determines average, maximum and minimum value simultane-
ously
ADEM:PM WRIT,OFF,OFF
Determines only current measurement results
ADEM:PM OFF,OFF,OFF
Switches the PM demodulator off.
ADEMOD
<result type>: WRITe, AVERage, MAXHold, MINHold; for details
see Chapter 2.3.6.1, "Trace Mode Result
The specified result type must be one of those configured with
the

[SENSe:]ADEMod:PM[:TDOMain][:TYPE]

Otherwise a query error will be generated.
ASCII Format (FORMat ASCII) or Binary Format (FORMat
REAL,32); for details see
Returned Values: ASCII Format and Binary
on page 118 .
Default unit: dB (logarithmic display) or RAD or DEG (linear dis-
play)
Chapter 2.3.6.1, "Trace Mode Result
[SENSe:]ADEMod:PM[:
Types",
Chapter 2.3.6.2, "Formats for
Format",
on page 118.
command.
134