R&S FSV-K7 Operating Manual page 86

®
R&S FSV-K7/K7S
Example:
Usage:
Mode:
CALCulate<n>:MARKer:FUNCtion:ADEMod:AM[:RESult<t>]? <Result>
CALCulate<n>:MARKer:FUNCtion:ADEMod:AM[:RESult<t>]?? <MeasType>
This command queries the results of the AM modulation measurement.
Suffix:
<n>
<t>
Parameters:
<Result>
Query parameters:
<MeasType>
Example:
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
ADEM ON, see
[SENSe:]ADEMod[:STATe]
Switches on analog demodulator
CALC:FEED 'XTIM:AM:TDOM', see
on page 90
Switches on AM result display.
DISP:TRAC ON, see
on page 111
STATe]
Switches the trace on.
CALC:MARK:FUNC:ADEM:AFR?
Queries the audio frequency.
Query only
ADEMOD
.
1...4
irrelevant
1...6
trace 1, 2, 3, 4, 5 or 6
The result of the selected measurement type is returned.
PPEak | MPEak | MIDDle | RMS
PPEak
Measurement with detector Pluspeak (+PK)
MPEak
Measurement with detector MinusPeak (-PK)
MIDDle
Averaging ±PK/2
RMS
RMS measurement
ADEM ON (see
[SENSe:]ADEMod[:STATe]
Switches on the analog demodulator.
CALC:FEED 'XTIM:AM:TDOM', see
on page 90
Switches on the AM result display.
DISP:TRAC ON, see
on page 111
STATe]
Switches on the trace.
CALC:MARK:FUNC:ADEM:AM? PPE
Queries the peak value.
CALCulate<n>:FEED
DISPlay[:WINDow<n>]:TRACe<t>[:
CALCulate<n>:FEED
DISPlay[:WINDow<n>]:TRACe<t>[:
on page 121
on page 121)
86