R&S FSV-K7 Operating Manual page 237

®
R&S FSV-K7/K7S
[SENSe:]SFM:<ChannelType>:AFSPectrum:RESult? <TraceMode>
This command reads the AF spectrum result data of the FM stereo signal in the speci-
fied trace mode. The data format of the output data block is defined by the FORMat
command (see
Binary
The output units are described in
on page 104.
Suffix:
<ChannelType>
Query parameters:
<TraceMode>
Example:
Usage:
Mode:
[SENSe:]SFM:<ChannelType>:FILTer:AWEighted[:STATe] <State>
This command activates/deactivates the weighted CCIR filter for the specified channel
type.
For details on the weighted "A" filter see
Suffix:
<ChannelType>
Parameters:
<State>
Example:
Mode:
Manual operation:
[SENSe:]SFM:<ChannelType>:FILTer:CCITt:STATe <State>
This command activates/deactivates the CCIT (CCIT P.53) weighting filter for the
specified channel type.
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the FM Stereo Option (R&S FSV–K7S)
Chapter 2.3.6.2, "Formats for Returned Values: ASCII Format and
Format", on page 118).
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
WRITe
At least one screen must display a channel with the specified
channel type that has the trace mode "Write" specified using
[SENSe:]ADEMod:AM[:ABSolute][:TDOMain][:TYPE]
on page 125. Otherwise a query error is generated.
SFM:LEFT:AFSP:RES MINH
Returns the minimum value in the left channel after a series of
measurements.
Query only
SFM
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
ON | OFF
*RST:
SFM:LEFT:FILT:AWEI ON
SFM
See "A Weighted"
FM Stereo Option R&S FSV–K7S
CALCulate<n>:MARKer<m>:PEXCursion
"A Weighted" on page 33.
OFF
on page 33
237