R&S FSV-K7 Operating Manual page 93

®
R&S FSV-K7/K7S
Manual operation:
CALCulate<n>:FORMat <Limitation>
This command activates the limitation to ±180°.
Suffix:
<n>
Parameters:
<Limitation>
Example:
Usage:
Mode:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:PNOise:RESult?
This command queries the result of the phase noise measurement at the specified
marker in the specified window.
A complete sweep with synchronization to the sweep end must be performed between
switching on the function and querying the measured value in order to obtain a correct
query result. This is only possible in single sweep mode.
Suffix:
<n>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
See "AM" on page 28
See "Screen A-D" on page 28
See "FM" on page 37
See "PM" on page 38
See "RF Power" on page 39
See "Left" on page 193
See "Screen A-D" on page 194
See "Right" on page 205
See "MPX" on page 205
See "Mono" on page 205
See "Stereo" on page 205
See "RDS" on page 205
See "Pilot" on page 205
See "RF Power" on page 205
.
1...4
irrelevant
PHASe | UPHase
PHASe
Limitation to ±180°
UPHase
Unwrapped
*RST: UPHase
CALC:FORM PHAS
Activates the limitation to ±180°.
SCPI confirmed
ADEMOD
See "Phase Wrap On/Off"
.
1...4
window
on page 39
93