R&S FSV-K7 Operating Manual page 29

®
R&S FSV-K7/K7S
●
Off: Whether it is displayed or not
●
Summary: Whether a summary of the evaluation lists from all screens is displayed
instead of a diagram
●
AM/FM/PM/RF Diagrams: Which type of diagram is displayed
For details on the result diagram types, see
Display",
Note: By default, the diagram or summary displays the data from trace 1. To change
the trace, use the
Remote command:
DISP:WIND2:STAT ON (see
Displays second window (Screen B).
CALC2:FEED 'XTIMe:FM:AFSPektrum1' (see
on page 90)
Displays an AF spectrum diagram of the demodulated FM signal from trace 1 in screen
B.
Predefined ← Display Config ← AM
You can store and load predefined screen configurations. All available configurations
are displayed in the "Predefined" tab. The current screen configuration is indicated
under "Current" at the top of the list.
Operating Manual 1176.7561.02 ─ 06
on page 20.
Select Trace softkey.
DISPlay[:WINDow<n>]:STATe
Analog Demodulation Option R&S FSV–K7
Softkeys of the Analog Demodulation option
Chapter 2.1.10, "Measurement Result
CALCulate<n>:FEED
on page 109 )
29