R&S FSV-K7 Operating Manual page 241

®
R&S FSV-K7/K7S
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency <Level>
This command activates/deactivates the selected low pass filter for the specified chan-
nel type.
For details on the low pass filter refer to
Suffix:
<ChannelType>
Parameters:
<Level>
Example:
Mode:
Manual operation:
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency[:ABSolute] <FilterType>
This command selects the absolute low pass filter type in the specified window. For
details on filters refer to
For details about the demodulation bandwidth range refer to
Suffix:
<n>
Parameters:
<FilterType>
Example:
Mode:
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency:RELative <FilterType>
This command selects the relative low pass filter type in the specified window. For
details on filters refer to
For details about the demodulation bandwidth range refer to
Suffix:
<n>
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the FM Stereo Option (R&S FSV–K7S)
"Low Pass"
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
<numeric value>
*RST: RST value
SFM:LEFT:FILT:LPAS:FREQ 10
SFM
See "Low Pass" on page 31
"Low Pass" on page 31.
.
1...4
window
3kHz | 15kHz | 150kHz
*RST: 15kHz
SFM:LEFT:FILT:LPAS:FREQ 150kHz
Selects the low pass filter for the demodulation bandwidth range
from 400 kHz to 16 MHz.
SFM
Low Pass softkey.
.
1...4
window
FM Stereo Option R&S FSV–K7S
on page 31.
"Demod BW"
"Demod BW"
on page 30.
on page 30.
241