R&S FSV-K7 Operating Manual page 216

®
R&S FSV-K7/K7S
Trigger
Trigger
Trigger
Repetition
Trigger
Trigger
Trigger Source
Opens the "Trg Source" submenu to select the trigger source.
In "FM Stereo" mode, the next measurement is triggered if the selected input signal
exceeds the threshold specified using the
odic signal modulated onto the carrier frequency can be displayed in this way. It is rec-
ommended that the measurement time covers at least five periods of the audio signal.
For triggering to be successful, the measurement time must cover at least 5 periods of
the audio signal.
Remote command:
TRIGger<n>[:SEQuence]:SOURce
Free Run ← Trigger Source
The start of a sweep is not triggered. Once a measurement is completed, another is
started immediately.
Remote command:
TRIG:SOUR IMM, see
External ← Trigger Source
Defines triggering via a TTL signal at the "EXT TRIG/GATE IN" input connector on the
rear panel.
Remote command:
TRIG:SOUR EXT, see
RF Power ← Trigger Source
Defines triggering of the measurement via signals which are outside the measurement
channel.
This trigger mode is available with detector board 1307.9554.02 Rev 05.00 or higher. It
is not available for input from the R&S Digital I/Q Interface (option R&S FSV-B17). If
RF Power trigger mode is selected and digital baseband input is activated, the trigger
mode is automatically switched to "Free Run".
RF power triggers are not available together with the bandwidth extension option
R&S FSV-B160.
In RF Power trigger mode the instrument uses a level detector at the first intermediate
frequency. The detector threshold can be selected in a range between - 50 dBm and
-10 dBm at the input mixer. The resulting trigger level at the RF input lies within the
following range:
(-24dBm + RF Att ) ≤ Triggerlevel ≤ (+5dBm + RF Att), max. 30 dBm, for Preamp =
OFF
(-40dBm + RF Att ) ≤ Triggerlevel ≤ (-11dBm + RF Att), max. 30 dBm, for Preamp = ON
Operating Manual 1176.7561.02 ─ 06
└ Time.............................................................................................................. 218
Level............................................................................................................... 218
Polarity............................................................................................................ 218
Offset.............................................................................................................. 219
Interval....................................................................................................... 219
Hysteresis....................................................................................................... 219
Holdoff.............................................................................................................220
TRIGger<n>[:SEQuence]:SOURce
TRIGger<n>[:SEQuence]:SOURce
FM Stereo Option R&S FSV–K7S
Instrument Functions FM Stereo (R&S FSV–K7S)
"Trigger Level" on page 66 softkey. A peri-
on page 167
on page 167
on page 167
216