R&S FSV-K7 Operating Manual page 94

®
R&S FSV-K7/K7S
<m>
Example:
Usage:
Mode:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:ANNotation:LABel:STATe <State>
This command turns labels for peaks found during a peak search on and off.
The labels correspond to the marker number in the marker peak list.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:LIST:SIZE <MaxNoPeaks>
This command defines the maximum number of peaks the marker peak list may con-
tain.
Suffix:
<n>
<m>
Parameters:
<MaxNoPeaks>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
1...16
marker
INIT:CONT OFF
Switches to single sweep mode.
CALC:MARK2 ON
Switches on marker 2.
CALC:MARK2:FUNC:PNO ON
Switches on the phase noise marker 2.
INIT;*WAI
Starts a sweep and waits for the end.
CALC:MARK2:PNO:RES?
Outputs the phase noise result of marker 2.
Query only
ADEMOD
See "Phase Noise" on page 72
.
Selects the measurement window.
Selects the marker.
ON | OFF
*RST: ON
CALC:MARK:FUNC:FPE:ANN:LAB:STAT OFF
Removes the peak labels from the diagram
See "Marker Number"
.
Selects the measurement window.
Selects the marker.
Maximum number of peaks to be determined.
*RST: 50
on page 75
94