R&S FSV-K7 Operating Manual page 113

®
R&S FSV-K7/K7S
Parameters:
<Distance>
Example:
Mode:
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel <ReferenceLevel>
This command defines the reference level.
With the reference level offset ≠ 0, the value range of the reference level is modified by
the offset.
Suffix:
<n>
<t>
Parameters:
<ReferenceLevel>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel:OFFSet <Value>
This command defines a reference level offset.
Suffix:
<n>
<t>
Parameters:
<Value>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition <Position>
This command defines the position of the reference level on the display grid..
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
<numeric value>
*RST: 20 PCT = linear AM display, (50 kHz = linear FM
display), (2 rad = linear PM display), (10 dB = loga-
rithmic AF spectrum display)
DISP:TRAC:Y:PDIV +10kHz
Sets the Y scale to 10 kHz per division.
ADEMOD
See "Dev per Division"
.
irrelevant.
irrelevant
The unit is variable.
Range: see datasheet
*RST: -10dBm
DISP:TRAC:Y:RLEV -60dBm
See "Ref Level" on page 44
.
irrelevant.
irrelevant
Range: -200 to 200
*RST: 0
Default unit: dB
DISP:TRAC:Y:RLEV:OFFS -10dB
See "Ref Level Offset"
on page 34
on page 48
113