R&S FSV-K7 Operating Manual page 89

®
R&S FSV-K7/K7S
CALCulate<n>:MARKer:FUNCtion:ADEMod:PM[:RESult<t>]? <Result>
CALCulate<n>:MARKer:FUNCtion:ADEMod:PM[:RESult<t>]?? <MeasType>
This command queries the results of PM modulation measurement of analog demodu-
lation.
Suffix:
<t>
<n>
Parameters:
<Result>
Query parameters:
<MeasType>
Example:
Usage:
Mode:
CALCulate<n>:MARKer:FUNCtion:ADEMod:SINad:RESult<t>?
This command queries the result of the SINAD measurement in the specified window.
Suffix:
<n>
<t>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
.
1...6
trace 1, 2, 3, 4, 5 or 6
1...4
irrelevant
The result of the selected measurement type is returned.
PPEak | MPEak | MIDDle | RMS
PPEak
Measurement with detector Pluspeak (+PK)
MPEak
Measurement with detector MinusPeak (-PK)
MIDDle
Averaging ±PK/2
RMS
RMS measurement
ADEM ON (see
[SENSe:]ADEMod[:STATe]
Switches on the analog demodulator.
CALC:FEED 'XTIM:FM:TDOM', see
on page 90
Switches on the FM result display.
CALC:MARK:FUNC:ADEM:PM? PPE
Queries the peak value.
Query only
ADEMOD
.
1...4
window
1...6
trace 1, 2, 3, 4, 5 or 6
on page 121)
CALCulate<n>:FEED
89