Remote Commands Of The Analog Demodulation (R&S Fsv-K7) - R&S FSV-K7 Operating Manual

®
R&S FSV-K7/K7S
Remote command:
INPut:DIQ:CDEVice
2.3 Remote Commands of the Analog Demodulation
(R&S FSV–K7)
In this section all remote control commands specific to the Analog Demodulation option
are described in detail. The abbreviation ADEMOD stands for the Analog Demodula-
tion operating mode. For details on conventions used in this chapter refer to
ter 2.3.1,
For further information on analyzer or basic settings commands, refer to the corre-
sponding subsystem in the base unit description.
In particular, the following subsystems are identical to the base unit; refer to the base
unit description:
●
CALCulate:DELTamarker
●
CALCulate:MARKer (except for the K7-specific commands described in
ter 2.3.2, "CALCulate Subsystem (Analog Demodulation, R&S
on page 85)
●
INITiate subsystem
●
INPut subsystem
●
OUTput subsystem
Subsystems of the Analog Demodulation (R&S FSV–K7)
2.3.1 Notation.........................................................................................................................82
2.3.2 CALCulate Subsystem (Analog Demodulation, R&S FSV–K7).................................... 85
2.3.2.1 CALCulate:MARKer:FUNCtion:ADEMod Subsystem (Analog Demodulation, Analog
Demodulation)...............................................................................................................85
2.3.2.2 Other CALCulate commands........................................................................................ 90
2.3.2.3 Other Referenced CALCulate Commands....................................................................98
2.3.3 DISPlay Subsystem (Analog Demodulation, R&S FSV–K7).......................................108
2.3.4 INSTrument Subsystem (Analog Demodulation, R&S FSV–K7).................................115
2.3.5 PROBe subsystem...................................................................................................... 116
2.3.6 SENSe Subsystem (Analog Demodulation, R&S FSV–K7)........................................ 117
2.3.6.1 Trace Mode Result Types............................................................................................118
2.3.6.2 Formats for Returned Values: ASCII Format and Binary Format................................ 118
2.3.6.3 SENSe:ADEMod Subsystem (Analog Demodulation, Analog Demodulation)............ 119
2.3.6.4 SENSe:ADJust Subsystem......................................................................................... 145
2.3.6.5 SENSe:BANDwidth Subsystem (Analog Demodulation, R&S FSV–K7).....................147
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the Analog Demodulation (R&S FSV–K7)
on page 178
"Notation", on page 82.
Analog Demodulation Option R&S FSV–K7
Chap-
Chap-
FSV–K7)",
81