R&S FSV-K7 Operating Manual page 154

®
R&S FSV-K7/K7S
Parameters:
<Frequency>
Example:
Manual operation:
[SENSe:]FREQuency:CENTer:STEP <StepSize>
This command defines the center frequency step size.
Parameters:
<StepSize>
Example:
Manual operation:
[SENSe:]FREQuency:CENTer:STEP:LINK <CouplingType>
This command couples and decouples the center frequency step size to the span or
the resolution bandwidth.
Parameters:
<CouplingType>
Example:
Manual operation:
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
Range: 0 to fmax
*RST: fmax/2
Default unit: Hz
f is specified in the data sheet. min span is 10 Hz
max
FREQ:CENT 100 MHz
See "Center" on page 40
Range: 1 to fmax
*RST: 0.1 x <span value>
Default unit: Hz
FREQ:CENT:STEP 120 MHz
See "Manual" on page 41
SPAN
Couples the step size to the span. Available for measurements
in the frequency domain.
(for RF spectrum result display)
RBW
Couples the step size to the resolution bandwidth. Available for
measurements in the time domain.
(for all result displays except RF spectrum)
OFF
Decouples the step size (manual input).
*RST: SPAN
FREQ:CENT:STEP:LINK SPAN
See "0.1*Span (RF Spectrum)"
See "0.1*Demod BW (AF/RF Time Domain, AF Spectrum)"
on page 41
See "0.5*Span (RF Spectrum)"
See "0.5*Demod BW (AF/RF Time Domain, AF Spectrum)"
on page 41
See "x*Span (RF Spectrum)"
See "x*Demod BW (AF/RF Time Domain, AF Spectrum)"
on page 41
on page 40
on page 41
on page 41
154