R&S FSV-K7 Operating Manual page 116

®
R&S FSV-K7/K7S
INSTrument[:SELect] <Mode>
Selects the instrument mode.
Parameters:
<Mode>
Mode:
Manual operation:
INSTrument:NSELect <Mode> <Mode>
Selects the instrument mode.
Parameters:
<Mode>
Mode:
2.3.5 PROBe subsystem
With firmware R&S FSVA/FSV 1.61SP2 or newer, active probes are supported (via an
adapter). The following commands activate and configure a connected probe which is
to provide an input signal. They are only available if a probe is connected to the instru-
ment's [RF Input] and USB connectors.
For details see the base unit description.
PROBe:ID:PARTnumber?
This command returns the material part number of the connected probe.
Example:
Usage:
PROBe:ID:SRNumber?
This command returns the serial number of the connected probe.
Example:
Usage:
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
ADEMod
Analog Demodulation option, R&S FSV–K7
SFM
FM Stereo option, R&S FSV–K7S
ADEMOD, SFM
See "Screen A-D" on page 194
3
Analog Demodulation option, R&S FSV–K7
7
FM Stereo option, R&S FSV–K7S
ADEMOD, SFM
PROB:ID:PART?
Query only
PROB:ID:SRN?
Query only
116