R&S FSV-K7 Operating Manual page 178

®
R&S FSV-K7/K7S
INPut:COUPling <CouplingType>
Toggles the RF input of the R&S FSVA/FSV between AC and DC coupling.
This function is not available if the R&S Digital I/Q Interface (R&S FSV-B17) is active.
Parameters:
<CouplingType>
Example:
Manual operation:
INPut:DIQ:CDEVice
This command queries the current configuration and the status of the digital baseband
input from the optional R&S Digital I/Q Interface (option R&S FSV-B17).
For details see the section "Interface Status Information" for the R&S Digital I/Q Inter-
face (R&S FSV-B17) in the description of the base unit.
Return values:
<ConnState>
<DeviceName>
<SerialNumber>
<PortName>
<SampleRate>
<MaxTransferRate>
<ConnProtState>
<PRBSTestState>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
AC | DC
*RST: AC
INP:COUP DC
See "Input (AC/DC)" on page 48
Defines whether a device is connected or not.
0
No device is connected.
1
A device is connected.
Device ID of the connected device
Serial number of the connected device
Port name used by the connected device
Maximum or currently used sampling rate of the connected
device in Hz (depends on the used connection protocol version;
indicated by <SampleRateType> parameter)
Maximum data transfer rate of the connected device in Hz
State of the connection protocol which is used to identify the
connected device.
Not Started
Has to be Started
Started
Passed
Failed
Done
State of the PRBS test.
Not Started
Has to be Started
178