R&S FSV-K7 Operating Manual page 109

®
R&S FSV-K7/K7S
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:MODE
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:PDIVision
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel:OFFSet
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RVALue
DISPlay[:WINDow<n>]:TRACe<t>:Y:SPACing
DISPlay:WSELect?
DISPlay:MTABle <DisplayMode>
This command turns the marker table on and off.
Parameters:
<DisplayMode>
Example:
Manual operation:
DISPlay[:WINDow<n>]:STATe <State>
This command activates the measurement specified window.
Suffix:
<n>
Parameters:
<State>
Example:
Usage:
Mode:
Manual operation:
DISPlay[:WINDow<n>][:SUBWindow<1|2>]:SELect
Moves the focus area to the selected window and subwindow.
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the Analog Demodulation (R&S FSV–K7)
.........................................................................................................115
ON
Marker table is displayed.
OFF
Marker table is not displayed.
AUTO
Marker table is only displayed if 2 or more markers are active.
*RST: AUTO
To activate the table display:
DISP:MTAB ON
To query the current state of the marker table display:
DISP:MTAB?
See "Marker Table"
.
1...4
window
ON | OFF
DISP:WIND2:STAT ON
Displays a second window (Screen B).
SCPI confirmed
ADEMOD
See "Screen A-D"
Analog Demodulation Option R&S FSV–K7
......................................................... 112
.................................................... 112
........................................................113
............................................113
....................................................113
.......................................................114
...................................................................114
on page 70
on page 28
109