R&S FSV-K7 Operating Manual page 151

®
R&S FSV-K7/K7S
Example:
Mode:
Manual operation:
[SENSe:]FILTer<n>:DEMPhasis:TCONstant <Deemphasis>
This command selects the deemphasis in the specified window.
For details on deemphasis refer to
For details on the demodulation bandwidth range refer to
Suffix:
<n>
Parameters:
<Deemphasis>
Example:
Mode:
Manual operation:
[SENSe:]FILTer<n>:HPASs[:STATe] <State>
This command activates/deactivates the selected high pass filter in the specified win-
dow.
For details on the high pass filter refer to
Suffix:
<n>
Parameters:
<State>
Example:
Mode:
Manual operation:
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
FILT:DEMP ON
Activates the selected deemphasis.
ADEMOD
See "Deemphasis" on page 33
"Deemphasis"
.
1...4
window
25 us | 50 us | 75 us | 750 us
*RST: 50 us
FILT:DEMP:TCON 750us
Selects the deemphasis for the demodulation bandwidth range
from 800 Hz to 4 MHz with a time constant of 750 µs.
ADEMOD
See "Deemphasis" on page 33
"High Pass"
.
1...4
window
ON | OFF
*RST: OFF
FILT:HPAS ON
Activates the selected high pass filter.
ADEMOD
See "High Pass" on page 31
See "None" on page 32
on page 33.
"Demod BW" on page 30.
on page 31.
151