Sense Subsystem - R&S FSV-K7 Operating Manual

®
R&S FSV-K7/K7S

3.2.3 SENSe Subsystem

The SENSe subsystem controls the essential parameters of the stereo FM demodula-
tor. In accordance with the SCPI standard, the keyword SENSe is optional for this rea-
son, which means that it is not necessary to include the SENSe node in command
sequences.
[SENSe:]SFM:FILTer<n>:AOFF
[SENSe:]SFM:STATe
[SENSe:]SFM:REFerence
[SENSe:]SFM:FILTer<n>:AOFF
This command switches all AF filters off.
Suffix:
<n>
Example:
Usage:
Mode:
[SENSe:]SFM:STATe <State>
This command switches between Stereo FM and Spectrum mode.
Parameters:
<State>
Example:
Mode:
[SENSe:]SFM:REFerence <Level>
This command defines the reference deviation required for relative deviation measure-
ments. Alternatively, it can be defined automatically, see e.g.
<ChannelType>:RSUMmary:REFerence[:AUTO] ONCE
Parameters:
<Level>
Example:
Mode:
Manual operation:
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the FM Stereo Option (R&S FSV–K7S)
....................................................................................... 235
...................................................................................................... 235
...............................................................................................235
.
1...4
window
SENS:SFM:FILT:AOFF
Event
SFM
ON | OFF
*RST: OFF
SFM:STAT ON
SFM
<numeric value> in Hz or dBm
*RST: -10.0 dBm
SFM:REF 2Hz
SFM
See "Result Summary Setup"
FM Stereo Option R&S FSV–K7S
[SENSe:]SFM:
on page 244
on page 196
235