R&S FSV-K7 Operating Manual page 110

®
R&S FSV-K7/K7S
Suffix:
<n>
Example:
Usage:
Mode:
DISPlay[:WINDow<n>]:SSELect?
Queries the currently selected subwindow.
Suffix:
<n>
Return values:
<Result>
Example:
Usage:
Mode:
DISPlay[:WINDow<n>]:TRACe<t>:MODE <Mode>
This command defines the type of display and the evaluation of the traces. WRITE cor-
responds to the Clr/Write mode of manual operation. The trace is switched off (=
BLANK in manual operation) with DISPlay[:WINDow<n>]:TRACe<t>[:STATe].
The number of measurements for AVERage, MAXHold and MINHold is defined with
the
[SENSe:]AVERage<n>:COUNt
be noted that synchronization to the end of the indicated number of measurements is
only possible in single sweep mode.
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
.
1
window
DISP:WIND2:STAT ON
Displays a second window (Screen B).
CALC2:FEED 'XTIMe:FM:AFSPektrum1'
Displays an AF spectrum diagram of the demodulated FM signal
from trace 1 in screen B.
DISP:WIND2:SEL
Switches the focus area to the evaluation list of the AF spectrum
diagram in screen B.
SCPI confirmed
ADEMOD
.
1...4
window
1 | 2
1
Diagram
2
Result list
DISP:WIND2:SUBW2:SEL
Switches the focus area to the result list in screen B.
DISP:WIND2:SSEL?
Result: 2
Query only
SCPI confirmed
ADEMOD
or
[SENSe:]SWEep:COUNt
commands. It should
110