R&S FSV-K7 Operating Manual page 243

®
R&S FSV-K7/K7S
Example:
Mode:
Manual operation:
[SENSe:]SFM:<ChannelType>:RSUMmary:MODE <Mode>
This command defines the result summary mode for the absolute and relative devia-
tion. It does not affect the trace mode.
Suffix:
<ChannelType>
Parameters:
<Mode>
Example:
Mode:
Manual operation:
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the FM Stereo Option (R&S FSV–K7S)
QPEak
Quasipeak CCIR
SQPeak
Quasipeak*SQRT2
*RST: PAVerage
SFM:LEFT:RSUM:DET PPE
Sets the detector for the left channel to positive peak.
SFM
See "Result Summary Setup"
See "Detector" on page 197
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
WRITe | AVERage | PHOLd
WRITe
Clear Write: Overwrite mode; the summary is overwritten by
each sweep.
AVERage
The average is formed over several sweeps. The number of
sweeps is defined by the sweep count (see
on page 155 or
COUNt
on page 157).
PHOLd
Peak hold: The maximum values are determined over several
sweeps and displayed. The number of sweeps is defined by the
sweep count (see[SENSe:]SWEep:COUNt
[SENSe:]AVERage<n>:COUNt
*RST: WRITe
AVER:COUN 16
Sets the number of measurements to 16.
SFM:LEFT:RSUM:MODE PHOL
Sets the result summary mode for the left channel to peak hold.
The maximum value during 16 measurements is displayed in the
result summary.
SFM
See "Result Summary Setup"
See "Mode" on page 197
FM Stereo Option R&S FSV–K7S
on page 196
[SENSe:]SWEep:
[SENSe:]AVERage<n>:COUNt
on page 155 or
on page 157).
on page 196
243