R&S FSV-K7 Operating Manual page 189

®
R&S FSV-K7/K7S
●
Chapter 3.1.5, "Softkeys of the Trigger Menu – TRIG Key (R&S
on page 215
Apart from the power measurement menu ([MEAS] key) that is not available in the "FM
Stereo" mode, all other menus not described here are provided as described for Ana-
log Demodulation mode (R&S FSV-K7). For details refer to the corresponding menu
descriptions.
●
Chapter 2.2.2, "Softkeys of the Frequency Menu – FREQ Key (Analog Demodula-
tion)",
●
Chapter 2.2.3, "Softkeys of the Span Menu – SPAN Key (Analog
on page 42
●
Chapter 2.2.5, "Softkeys of the Auto Set menu - AUTO SET Key (Analog Demodu-
lation)",
●
Chapter 2.2.7, "Softkeys of the Sweep Menu – SWEEP Key (Analog Demodula-
tion)",
●
Chapter 2.2.8, "Softkeys of the Trace Menu – TRACE key (Analog
on page 57
●
Chapter 2.2.10, "Softkeys of the Marker Menu – MKR key (Analog
on page 67
To display help to a softkey, press the HELP key and then the softkey for which you
want to display help. To close the help window, press the ESC key. For further informa-
tion refer to
Further Information
●
Chapter 2.1.3, "Sample Rate, Measurement Time and Trigger
●
Chapter 3.1.1, "Measurement Result Display (FM
3.1.1 Measurement Result Display (FM Stereo).................................................................. 189
3.1.2 Softkeys of the FM Stereo Menu - MEAS key (K7S).................................................. 192
3.1.3 Softkeys of the Amplitude Menu – AMPT Key (R&S FSV–K7S).................................206
3.1.4 Softkeys of the Bandwidth Menu – BW Key (R&S FSV–K7S).................................... 211
3.1.5 Softkeys of the Trigger Menu – TRIG Key (R&S FSV–K7S).......................................215
3.1.6 Softkeys of the Marker Function Menu – MKR FUNC Key (R&S FSV–K7S)..............220
3.1.1 Measurement Result Display (FM Stereo)
In FM Stereo mode, the measurement results can be displayed in up to 4 different
screens (windows), plus an additional marker table, if applicable. Each screen shows
either the measurement results as a diagram or the results of evaluation functions in a
table ("Result Summary").
All displays are determined by the I/Q data set recorded for the measurement.
You can define the display configuration for up to 4 different screens at once using the
"Display Config"
Operating Manual 1176.7561.02 ─ 06
on page 40
on page 49
on page 55
Chapter 1.3, "How to Use the Help
on page 193 softkey.
FM Stereo Option R&S FSV–K7S
Instrument Functions FM Stereo (R&S FSV–K7S)
System", on page 7.
Stereo)",
FSV–K7S)",
Demodulation)",
Demodulation)",
Demodulation)",
Offset", on page 13
on page 189
189