R&S FSV-K7 Operating Manual page 236

Analog demodulation and fm stereo
Table of Contents

Advertisement

®
R&S
FSV-K7/K7S
3.2.4 [SENSe:]SFM:<ChannelType> Subsystem
The [SENSe:]SFM:<ChannelType> subsystem contains commands for the defini-
tion of frequency and level settings when measuring the specific channels of FM stereo
signals.
[SENSe:]SFM:<ChannelType>:AFSPectrum:TYPE
[SENSe:]SFM:<ChannelType>:AFSPectrum:RESult?
[SENSe:]SFM:<ChannelType>:FILTer:AWEighted[:STATe]
[SENSe:]SFM:<ChannelType>:FILTer:CCITt:STATe
[SENSe:]SFM:<ChannelType>:FILTer:CCIR[:UNWeighted][:STATe]
[SENSe:]SFM:<ChannelType>:FILTer:CCIR:WEIGhted[:STATe]
[SENSe:]SFM:<ChannelType>:FILTer:COUPling
[SENSe:]SFM:<ChannelType>:FILTer:DEMPhasis:STATe
[SENSe:]SFM:<ChannelType>:FILTer:DEMPhasis:TCONstant
[SENSe:]SFM:<ChannelType>:FILTer:HPASs:STATe
[SENSe:]SFM:<ChannelType>:FILTer:HPASs:FREQuency
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:STATe
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency[:ABSolute]
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency:RELative
[SENSe:]SFM:<ChannelType>:RSUMmary:COUPling
[SENSe:]SFM:<ChannelType>:RSUMmary:DETector[:FUNCtion]
[SENSe:]SFM:<ChannelType>:RSUMmary:MODE
[SENSe:]SFM:<ChannelType>:RSUMmary:REFerence[:AUTO] ONCE
[SENSe:]SFM:<ChannelType>:TDOmain:RESult?
[SENSe:]SFM:<ChannelType>:TDOmain:TYPE
[SENSe:]SFM:<ChannelType>:AFSPectrum:TYPE <TraceMode>
This command selects the trace modes of the FM stereo AF spectrum to be measured
simultaneously. For each trace a mode can be defined, however only if the specified
channel is currently displayed in one of the four screens. If a trace mode is set for a
channel that is not displayed, a query error is generated.
Suffix:
<ChannelType>
Parameters:
<TraceMode>
Example:
Mode:
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the FM Stereo Option (R&S FSV–K7S)
............................................................... 239
................................................................ 244
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
<TraceMode1>, <TraceMode2>, <TraceMode3>, <Trace-
Mode4>, <TraceMode5>, <TraceMode6>
WRITe | AVERage | MAXHold | MINHold | VIEW | OFF
For details on trace modes see
Result
Types",
on page 118.
*RST:
OFF,OFF,OFF,OFF,OFF,OFF
SFM:LEFT:AFSP:TYPE WRIT,OFF,AVER
SFM
FM Stereo Option R&S FSV–K7S
............................................................236
........................................................ 237
..................................................237
........................................................... 237
.....................................238
..........................................238
...................................................239
............................................239
......................................................... 240
.................................................240
..........................................................240
................................................. 241
................................. 241
................................... 241
....................................................... 242
........................................242
............................................................ 243
............................... 244
.............................................................244
Chapter 2.3.6.1, "Trace Mode
236

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fsv-k7s

Table of Contents