R&S FSV-K7 Operating Manual page 152

®
R&S FSV-K7/K7S
[SENSe:]FILTer<n>:HPASs:FREQuency <FilterType>
This command selects the high pass filter type in the specified window. For details on
filters refer to
For details about the demodulation bandwidth range refer to
Suffix:
<n>
Parameters:
<FilterType>
Example:
Mode:
Manual operation:
[SENSe:]FILTer<n>:LPASs[:STATe] <State>
This command activates/deactivates the selected low pass filter in the specified win-
dow.
For details on the low pass filter refer to
Suffix:
<n>
Parameters:
<State>
Example:
Mode:
Manual operation:
[SENSe:]FILTer<n>:LPASs:FREQuency[:ABSolute] <FilterType>
This command selects the absolute low pass filter type in the specified window. For
details on filters refer to
For details about the demodulation bandwidth range refer to
Suffix:
<n>
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the Analog Demodulation (R&S FSV–K7)
"High Pass" on page 31.
.
1...4
window
Range: 50 to 300
*RST: 300Hz
Default unit: Hz
FILT:HPAS:FREQ 300Hz
Selects the high pass filter for the demodulation bandwidth
range from 800 Hz to 16 MHz.
ADEMOD
See "High Pass"
.
1...4
window
ON | OFF
*RST: OFF
FILT:LPAS ON
Activates the selected low pass filter.
ADEMOD
See "Low Pass"
"Low Pass" on page 31.
.
1...4
window
Analog Demodulation Option R&S FSV–K7
"Demod BW"
on page 31
"Low Pass" on page 31.
on page 31
"Demod BW"
on page 30.
on page 30.
152