R&S FSV-K7 Operating Manual page 90

®
R&S FSV-K7/K7S
Example:
Usage:
Mode:
CALCulate<n>:MARKer:FUNCtion:ADEMod:THD:RESult<t>?
This command queries the result of the THD measurement in the specified window.
Suffix:
<n>
<t>
Example:
Usage:
Mode:
2.3.2.2 Other CALCulate commands
CALCulate<n>:FEED <Evaluation>
This command selects the evaluation method of the measured data that is to be dis-
played in the specified window.
The suffix <1...6> indicates which of the traces is evaluated in the result summary.
Note that all result summaries are identical, as the results of all evaluations are inclu-
ded in the summary.
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
ADEM ON (see
[SENSe:]ADEMod[:STATe]
Switches on analog demodulator
CALC:FEED 'XTIM:FM:AFSP', see
on page 90
Switches on AF spectrum of FM
CALC:MARK:FUNC:ADEM:SIN:RES?
Queries SINAD value
Query only
ADEMOD
.
1...4
window
1...6
trace 1, 2, 3, 4, 5 or 6
ADEM ON (see
[SENSe:]ADEMod[:STATe]
Switches on analog demodulator
CALC:FEED 'XTIM:FM:AFSP', see
on page 90
Switches on AF spectrum of FM
DISP:TRAC ON, see
on page 111
STATe]
Switches on the trace
CALC:MARK:FUNC:ADEM:THD:RES?
Queries THD result
Query only
ADEMOD
CALCulate<n>:FEED
CALCulate<n>:FEED
DISPlay[:WINDow<n>]:TRACe<t>[:
on page 121)
on page 121)
90