R&S FSV-K7 Operating Manual page 197

®
R&S FSV-K7/K7S
[SENSe:]SFM:<ChannelType>:RSUMmary:COUPling
[SENSe:]SFM:<ChannelType>:RSUMmary:REFerence[:AUTO] ONCE
on page 244
Detector ← Result Summary Setup ← Left
Defines the detector used for the deviation measurement.
●
"RMS"
●
"RMS*SQRT2"
●
"Pos Peak"
●
"Neg Peak"
●
"±Peak/2"
●
"QP CCIR"
●
"QP*SQRT2"
Note: To ensure correct measurements with QP detectors, it is recommended that you
set the measurement time to its maximum value (see
Chapter 2.1.3, "Sample Rate, Measurement Time and Trigger
Remote command:
[SENSe:]SFM:<ChannelType>:RSUMmary:DETector[:FUNCtion]
Mode ← Result Summary Setup ← Left
Defines the result summary mode for the absolute deviation and the deviation relative
to the reference.
"Clear Write"
"Peak Hold"
"Average"
Remote command:
[SENSe:]SFM:<ChannelType>:RSUMmary:MODE
Coupled ← Result Summary Setup ← Left
All channels for which this option is enabled are configured identically, i.e. the channel
settings are coupled. If you change the settings for one coupled channel, the settings
are changed for all other coupled channels, as well. The settings are taken from the
first channel for which coupling is enabled.
Remote command:
[SENSe:]SFM:<ChannelType>:RSUMmary:COUPling
Meas To Ref ← Result Summary Setup ← Left
Determines the "Reference Deviation" from the current channel measurement.
Remote command:
[SENSe:]SFM:<ChannelType>:RSUMmary:REFerence[:AUTO] ONCE
on page 244
Meas Time ← Left
Opens an editor for entering the measurement time of the analog demodulation. For
details on the measurement time values refer to
surement Time and Trigger
Operating Manual 1176.7561.02 ─ 06
Instrument Functions FM Stereo (R&S FSV–K7S)
Overwrite mode: the summary is overwritten by each sweep. This is
the default setting.
The peak values are determined over several sweeps and displayed.
The average is formed over several sweeps.
Offset", on page 13.
FM Stereo Option R&S FSV–K7S
on page 242
"Meas Time" on page 31 and
Offset", on page 13).
on page 243
on page 242
Chapter 2.1.3, "Sample Rate, Mea-
on page 242
197